ZOELLER
|
DEAN BENNETT SUPPLY |
|
These high density polyethylene sewage basins are IAPMO
approved and are ideal for either residential or commercial applications. Polyethylene
basins offer one-piece |
|
|
||
| #31-0091 | $ 85.00 | 18" x 30" Simplex
Poly Tank with 2" discharge and 2" vent |
|
| #31-0082 | $ 93.00 | 18" x 30" Simplex
Poly Tank with 3" discharge and 3" vent |
|
| #31-0159 | $ 122.00 | 18" x
30" Special Simplex Tank with 2" Discharge and 2" Vent IAPMO 10' Water Stack Test Rated. CA. & FL. Aproved. |
|
| #31-0039 | $ 242.00* |
24" x 30" Extra Large Simplex Sewage Poly Tank with 2" discharge and vent |
|
| #31-0040 | $ 250.00* | 24" x 30" Extra
Large Simplex Sewage Poly Tank with 3" discharge and vent |
|
| #31-0251 | $ 65.00 | 18" x
22" Poly Basin w/ Radon Sealed Steel Lid for sump pumps only. |
|
|
![]() |
|||
| #31-0043 | $ 483.00* | 30" x
36" Duplex Poly Tank |
||
| #31-0044 | $ 513.00* | 30" x
36" Duplex Poly Tank |
||
#31-0047 |
$ 547.00* |
|
||
| #31-0048 | $ 577.00* | 36" x
36" Duplex Poly Tank |
||
|
24" x 48"
FIBERGLASS SIMPLEX BASIN #31-0866 $ 495.00* This 24" x 48" deep fiberglass simplex basin is designed for outdoor installation for a single sewage pump or for a grinder pump. The basin has an anti-floatation ring to prevent the tank from rising due to ground water. A solid 3/8" thick fiberglass lid covers the tank, while you get 5 grommet seals, one 1-1/4", one 1-1/2" two 2", and one 4", to install incoming and outgoing pipes. | |
|
24" x
60" FIBERGLASS SIMPLEX BASIN #31-0946 $ 549.00* This 24" x 60" deep fiberglass simplex basin is designed for outdoor installation for a single sewage pump or for a grinder pump. The basin has an anti-floatation ring to prevent the tank from rising due to ground water. A solid 3/8" thick fiberglass lid covers the tank, while you get 5 grommet seals, one 1-1/4", one 1-1/2" two 2", and one 4", to install incoming and outgoing pipes.
| ![]() |
|
#31-1451 $ 1035.00* This 36" x 60" fiberglass outdoor burial basin is designed for a duplex 2 pump installation. The basin comes complete with a set of 5 Adapta-Flex seals for installing your lines in and out of the basin. The seals are one 1-1/4", one 1-1/2", two 2", and one 4". This basin can be used with 2 sewage grinder pumps, or 2 standard Zoeller sewage pumps, for a duplex 2 pump sewage system. |
|
| $ 245.00 #310994 for use with 24" fiberglass basins. Zoeller does not recommend using more than one extension with their fiberglass tanks. | |
| $ 299.00 #310813 for use with 36" fiberglass basins. Zoeller does not recommend using more than one extension with their fiberglass tanks. |
|
|||||||||||
|
|
Prices effective September 15, 2007