PRESSURE TANK
|
DEAN BENNETT SUPPLY CO 800-621-4291 |
|||||
 |
These deluxe long cross tank fittings kits are designed for use with Air-E-Tainer bladder type pressure tanks, or other brand tanks where the discharge tapping is underneath the tank and inside the center of the skirt. Each kit contains a long tank cross, a boiler drain, 100 psi pressure gauge, a pressure switch, 1/4" x 4" brass nipple, and a check valve. We also recommend a 100 psi pressure relief to protect against tank damage from over pressurizing. |
 Stainless Steel Deluxe Fitting Kit |
||||
| 1" LONG TANK FITTINGS KIT | ||||||
|
$ 88.25 |
7091DFK |
1" Deluxe long tank fittings kit contains a
1" long tank cross #709, a 100 psi pressure gauge, a 30-50 psi pressure switch, a
1/4" x 4" long brass nipple, a 1/2" boiler drain, and a 1" brass
check valve. |
||||
| $ 99.75 | 709U1DFK |
1" Deluxe long tank fittings kit contains a
1" long tank cross with built in union #709U1, a 100 psi pressure
gauge, a 30-50 psi pressure switch, a 1/4" x 4" long brass
nipple, a 1/2" boiler drain, and a 1" brass check valve. |
||||
| $ 171.00 | 709U1SSDFK |
1" Deluxe Stainless
Steel long tank fitting kit |
||||
| $ 8.50 | RV2N100 |
1/2" pressure relief valve set at 100 psi. |
||||
| $ 13.00 | RV2N100SS |
1/2" Stainless Steel
100 psi Non-adjustable Pressure Relief. |
||||
1-1/4" LONG TANK FITTINGS KIT |
||||||
| $ 125.40 | 709114DFK |
1-1/4" Deluxe long tank fitting kit contains a
1-1/4" long tank cross #709, a 100 psi pressure gauge, a 40-60 psi pressure switch, a
1/4" x 4" long brass nipple, a 3/4" boiler drain, and a 1-1/4" brass
check valve. |
||||
| $ 132.75 | 709U114DFK |
1-1/4" Deluxe long tank fitting kit contains a
1-1/4" long tank cross with built in union #709U114, a 100 psi
pressure gauge, a 40-60 psi pressure switch, a 1/4" x 4" long
brass nipple, a 3/4" boiler drain, and a 1-1/4" brass check
valve. |
||||
| $ 174.50 | 709U114SSDFK |
1-1/4" Deluxe Stainless Steel long tank fitting kit with union on tank leg like the 709U114DFK above except all stainless steel. Kit contains a 1-1/4" long stainless tank cross with built in union #709U114SS, 100 psi stainless pressure gauge, 1/4" x 4" long stainless steel nipple, 3/4" stainless bibb spout, and 1-1/4" stainless check valve, and a 40-60 pressure switch. Add $14.00 for 3/4" stainless steel pressure relief valve. |
||||
| $ 12.50 | RV3N100 |
3/4" pressure relief valve set at 100 psi. |
||||
| $ 14.00 | RV3N100SS |
3/4" Stainless Steel
100 psi Non-adjustable pressure relief. |
||||
1" SHORT TANK FITTINGS KIT |
||||||
| $ 77.00 | 7101DFK | 1" Deluxe short tank fittings kit contains a
1" short tank cross #710, a 100 psi pressure gauge, a 30-50 psi pressure switch, a
1/4" x 4" long brass nipple, a 1/2" boiler drain, and a 1" brass
check valve. |
||||
| $ 8.50 | RV2N100 | 1/2" pressure relief valve set at 100 psi. The 100 psi pressure relief is recommended since most pressure tanks are rated for 100 psi maximum operating pressure. |
||||
| 1-1/4" SHORT TANK FITTINGS KIT |
||||||
| $ 94.85 | 710114DFK | 1-1/4" Deluxe short tank fittings kit contains
a 1-1/4" short tank cross #710, a 100 psi pressure gauge, a 30-50 psi pressure
switch, a 1/4" x 4" long brass nipple, a 3/4" boiler drain, and a 1-1/4" brass check valve. |
||||
| $ 12.50 | RV3N100 | 3/4" pressure relief valve set at 100 psi. The 100 psi pressure relief is recommended since most pressure tanks are rated for 100 psi maximum operating pressure. |
||||
TANK CROSSES |
||||||
| $ 14.75 | 7101 |
1" #710 short tank cross with all 3 points tapped 1" male and
3/4" female thread. Tank leg of tee is 3 1/4" long, the 2 front ports are
1/2", and the 2 top ports are 1/4" |
 #710 SHORT TANK CROSS |
|||
| $ 26.00 | 7091 |
1" #709 long tank cross with all 3 points tapped 1" male and
3/4" female thread. Tank leg is 9 1/2" long, the 2 front ports are 1/2",
and the 2 top ports are 1/4" |
 #709 LONG TANK CROSS |
|||
| $ 37.50 | 709U1 |
1" #709U1 long tank cross with built in union.
Tank leg has 1" male threads. Cross in front of the union, has
1" male threads and 3/4" female internal threads on ends of the
cross. There are two 1/2" female thread openings in the front of the
cross for a boiler drain and a pressure relief, and two 1/4" female
thread openings in the top of the cross for a 1/4" brass nipple used
for mounting the pressure switch, and the second one is for the pressure
gauge. |
 #709U LONG TANK CROSS |
|||
| $ 86.25 | 709U1SS |
1" Stainless Steel long tank cross with built in
union. Tank leg has 1" male threads. Cross in front of the union has 1"
male threads and 3/4" female internal threads on the ends of the cross.
There are two 1/2" female thread openings in the front of the cross for a
bibb spout and a pressure relief, and two 1/4" female thread openings in
the top of the cross for a 1/4" stainless nipple used to mount the
pressure switch, and a second one is for the pressure gauge. |
 709 Stainless Steel Tank Cross with Union |
|||
| $ 21.95 | 710114 |
1-1/4" #710 short tank cross with all 3 points tapped 1
1/4" male and 1" female. Tank leg is 3 1/4" long, the 2 front ports are
3/4", and the 2 top ports are 1/4" |
||||
| $ 52.50 | 709114 |
1-1/4" #709 long tank cross with all 3 points tapped 1
1/4" male and 1" female. Tank leg is 12 1/2" long, the front 2 ports are
3/4", and the 2 top ports are 1/4" |
||||
| $ 59.75 | 709U114 | 1-1/4" #709U114 long tank cross with built in union. Tank leg has
1-1/4" male threads. Cross in front of the union, has 1-1/4"
male threads and 1" female internal threads on ends of the cross.
There are two 3/4" female thread openings in the front of the cross
for a boiler drain and a pressure relief, and two 1/4" female thread
openings in the top of the cross for a 1/4" brass nipple used for
mounting the pressure switch, and the second one is for the pressure
gauge. |
||||
| $ 91.50 | 709U114SS |
1-1/4" Stainless Steel long tank cross with built in
union. Tank leg has 1-1/4" male threads. Cross in front of the union has
1-1/4" male threads and 1" female internal threads on the ends of the
cross. There are two 3/4" female thread openings in the front of the cross
for a bibb spout and a pressure relief, and two 1/4" female thread
openings in the top of the cross for a 1/4" stainless nipple used to mount
the pressure switch, and a second one is for the pressure gauge. |
||||
PRESSURE RELIEF VALVES |
||||||
|
ECONOMY NON-ADJUSTABLE PRESSURE RELIEFS |
||||||
 |
RV2N | $ 6.95 | 1/2" non-adjustable pressure relief
set at 75 psi. |
|||
| RV3N | $ 9.55 | 3/4" non-adjustable pressure relief
set at 75 psi. |
||||
|
RV2N100 |
$ 8.50 |
1/2" non-adjustable pressure relief set at 100 psi. |
||||
| RV3N100 | $ 12.50 | 3/4" non-adjustable pressure relief
set at 100 psi. |
||||
| RV2N100SS | $ 13.00 | 1/2" non-adjustable stainless steel pressure relief set at 100 psi. | ||||
| RV3N100SS | $ 14.00 |
3/4" non-adjustable stainless steel pressure relief set at 100 psi. |
||||
| DELUXE ADJUSTABLE PRESSURE RELIEF VALVES | ||||||
 |
RV2 | $ 29.50 | 1/2" adjustable pressure relief valve Factory set at 75 psi - adjustable from 10 to 200 psi. |
|||
| RV3 | $ 43.35 | 3/4" adjustable pressure relief valve Factory set at 75 psi - adjustable from 10 to 200 psi. |
||||
| RV4 | $ 74.50 | 1" adjustable pressure relief valve Factory set at 75 psi - adjustable from 25 to 200 psi. |
||||
| RV5 | $ 108.00 | 1-1/4" non-adjustable pressure relief
valve. Factory set at 65 psi. NOT ADJUSTABLE |
||||
| RV8 | $ 245.00 | 2" adjustable pressure relief valve Factory set at 75 psi - adjustable from 25 - 200 psi. |
||||
|
We now stock
Stainless Steel Tank Tees, Pressure Relief Valves, Boiler Drains.
Water Well
Accessories
|
||||||