Aermotor windmills pump water with wind power. Dean Bennett Supply has served the windmill customer since 1965.

Aermotor windmills pump water with wind power. Dean Bennett Supply has served the windmill customer since 1965. Call 800-621-4291 today to get help with your windmill, hand pump, pumping cylinder and other windmill system accessories.
 
STUFFING BOXES
for Windmills

DEAN BENNETT SUPPLY
Ph 1-800-621-4291
Smart Phone Dialable


WINDMILL STUFFING BOXES

Windmill stuffing boxes are brass packing boxes that are screwed into a tee at the top of the well. The packing box is packed with graphite rope packing around the stuffing box rod, and a packing nut is tightened down to secure the graphic rope packing around the rod. This lubricates the rod, and prevents leakage from the top of the stuffing box.


Stuffing Box Catalog Page 66

Stuffing boxes prevent water from coming out of the top of the pipe when the rod strokes through. $ 112.00 1-1/4" Stuffing Box designed to screw into a 1-1/4" tee, these heavy duty stuffing boxes are made entirely of brass and are furnished with steel rods 3/4" diameter by 18" long with either 7/16" or 5/8" threads (specify) These boxes are already factory packed using 1/4" square graphite rope packing and are ready for installation.
$ 129.00 2" Stuffing Box with an 18" rod designed to screw into a 2" tee.
$ 165.00 2" Stuffing Box with an 48" rod designed for use with open top working barrel cylinders. Eliminates the need for a make-up pony rod to go down into the cylinder to the plunger.
$     4.95 1/4" x  6" long pieces of graphite rope packing
$   21.75 Replacement 3/4" x  18" Steel Rod Only (specify 7/16" or 5/8" thread size)
$   37.50 Extra Long 3/4" x  48" Steel Rod Only threaded 5/8" both ends

HEAVY SERVICE PACKING BOXES

Stuffing Box Catalog Page 66

$ 312.00 2" Heavy Service Packing Box is extra heavy, made entirely of brass and furnished with a steel rod. They are bored throughout the full length to hold the most packing possible. Piston rod is 1-1/6" diameter x  4 feet long and threaded 5/8" for pump rod. Uses about 5 ounces or 3/8" packing. Heavy duty packing boxes have more graphite rope packing.

$ 343.00 2-1/2" Heavy Service Packing Box like above unit except rod has 7/8" threads and uses 1/2" packing.
$ 350.00 3" Heavy Service Packing Box like 2-1/2" unit above except this unit is special order only

#3 Inverted Brass Tube Stuffing Box

Stuffing Box Catalog Page 66

Inverted brass stuffing boxes pump on the down stroke too.
$ 135.00 #3 Inverted Brass Tube Stuffing Box has a 1-1/8" inside diameter brass tube that is 18" long. The top brass connection is threaded 2" male iron pipe thread. The brass piston has two 1-1/8" leather cups on a 5/8" steel plunger rod with standard 5/8" rod threads. This IBT stuffing box can acommodate up to a 12" stroke. Larger diameter brass tubes and longer strokes are available on request.

GALVANIZED STEEL STUFFING BOX TEES

Download Galvanized Tees in pdf

At the top of your string of galvanized steel drop pipe going down to your cylinder in the well, you will need a galvanized steel tee to screw your stuffing box into, and the water pipe out the side of the tee to carry the water over to the destination, whether it is a stock tank of pond.

Galvanized steel tee for stuffing box.

 Size Tee Price
1-1/4" $   4.50
2" $   9.30
2-1/2" $ 25.00
3" $ 29.50

HOME

Download our catalog in pdf format
Prices effective August 1, 2008