|
|
COMMANDER PRO 150 COMPLETE PACKAGED CONSTANT PRESSURE PUMP SYSTEMS |
| DESIGNED FOR THE PROFESSIONAL PUMP INSTALLER FEATURES: Easy Installation Increases flow as demand increases Adjustable constant pressure Built-in diagnostics Automatic pump and motor protection Smart Reset (R) technology |
|
| 3 HP Constant Pressure
Systems for Irrigation and Deep Well Applications The Commander Pro 150 series of pre-packaged constant pressure water systems is designed specifically for demanding applications. Seven models engineered to provide a constant pressure water supply from as deep as 1200' or at flows from 2.7 to 73 gpm at 50 psi. These system packages are ideal for use in residential and light commercial applications, including large homes, deep wells, ground source heat pumps, lawn irrigation systems and water features. Features include dependable 4" submersible pump technology, single-phase power input and the innovative Franklin Subdrive 150 variable speed controller. These systems are designed to reduce total equipment costs, as large bulky tanks, external motor protection devices and complicated adjustments are no longer required. |
| Applications | ||||
| Residential Water Systems | Lawn Irrigation Systems | |||
| "City-like" water pressure | Even distribution of water in zones | |||
| Smaller tank saves space | Eliminates need for separate system | |||
| Geothermal Systems | Water Treatment Systems | |||
| No need for large buried tanks | More efficient back flushing | |||
| Eliminates pressure cycling | No need for multiple pumps | |||
| GENERAL SPECIFICATIONS - Commander Pro 150 Series | |||
| Use 30 Amp for CP150 | Input ( from power source ) |
Voltage Frequency Amps (RMS) Power at Power at Power Factor |
200-250 V/Single Phase 60/50 Hertz 23 Amps 560 watts @ 30 Hz 4600 watts @ 80 Hz 1 Constant |
| Output ( to motor ) |
Voltage Frequency Amps (RMS) Start |
Variable V/Three Phase Variable 30-80 Hz 10.9 Amps High Torque/Soft Start 25-80 PSI preset 50 psi NEMA 1 (indoors) |
|
| Built-in protection & diagnostics for |
|
||
| Surge Protection |
Short Circuit |
||
| Underload - low water condition |
Overheat Controller w/auto |
||
| Undervoltage |
compensation feature. |
||
| Locked pump w/auto reverse feature | |||
|
"City-like" water pressure for rural water systems |
|||
 |
 |
 |
|
| Franklin's CP Subdrive 150 Controller with advanced electronics. Air-cooled NEMA 1 enclosure. Adjusts 25 to 80 PSI constant pressure. Includes pressure sensor. | Factory specified pump end for optimal performance and efficiency. Specifically factory engineered to be compatible with Subdrive 150 controller. | Proven Franklin Super Stainless water-lubricated motor. Performance matched for long life. Specified to avoid overload. | Small Air-E-Tainer (R) 14 gal. capacity tank saves space and money. Properly sized and pre-charged to 35 psi or 70% of desired system pressure, for use with this system. |
 |
|
CP150-07 Pump System $ 2985.00 |
 |
|
CP150-10 Pump System $ 2985.00 |
 |
|
CP150-19 Pump System $ 2985.00 |
 |
|
CP150-27 Pump System $ 2955.00 |
 |
|
CP150-35 Pump System $ 3050.00 |
 |
|
CP150-55 Pump System $ 3145.00 |
 |
|
CP150-85 Pump System $ 3145.00 |
All CP100 Series constant pressure pumps require our CPSMSS20KIT for $ 247.00 which includes the 2" Stainless Steel manifold, which protects against throttling your flow, and gives you the 1" leg back to the pressure tank. Kit includes a 1" adjustable pressure relief.
Constant pressure
pump system fitting kit for pressure tank #CPSM125100KIT |
